“3D技术若普及,文创将会是第一波被带动的产业。”研能科技公司企划专员徐尉竣表示,未来3D技术的普及化,除了可以让设计师不需经过工厂就可看到自己设计的作品,甚至一些简单的生活用品也可能直接在家中制作。德芮达科技公司行销部经理陈世鸿认为,3D打印技术具有改变我们生活型态的潜力。

If "3 d technology popularization, wen chong will be first driven by industry." Xu Wei can grind technology companies planning commissioner stern, said the future of 3 d technology diffusion, besides can let designers do not need to can see their design works in the factory, even some simple things may also directly produced in the home. DE rui da Chen Shihong technology company marketing manager believes that 3 d printing technology has the potential to change our lifestyle.

记者会中,镁光灯闪烁不断,机器手臂不断地前后摆动,一个钢铁人的头部以塑料粉末慢慢的被“打印”出来。3日,多台3D打印机在“台北国际光电周”和“2013台湾平板显示器展”联合发表记者会上,随即成为全场注目的焦点。

News conference, magnesium light flashing constantly, robotic arms back and forth unceasingly, an iron man's head with plastic powder slowly come out by "print". More than 3, 3 d printer in Taipei international photoelectric week "and" 2013 Taiwan flat-panel display exhibition "jointly issued a press conference, and then become the focus of all attention.

在电脑中输入想要的样式,经过几个小时后,完全一模一样的产品就能呈现在眼前。完全不需复杂繁重的开模制作或是交由工厂处里,只要一台3D打印机,加上一个有设计思考的脑袋,将产品设计输入程序中,创意马上可以成为成品。

Input in the computer you want to style, after a few hours later, totally the same product can be presented to the eyes. Completely don't need to be complicated or heavy open mold production to the factory department, as long as a 3 d printer, and a head of design thinking, product design input program, creativity can be finished at once.

英国《经济学人》杂志称,3D打印技术会是人类的“第三次工业革命”。

British "economist" magazine said that 3 d printing will be human "third industrial revolution".

陈世鸿表示,3D打印技术在不久的将来会有两种发展,第一种是往精密技术的方向发展,专门为科技产业或研究单位使用,属于高端应用;另一方面则是往个人或是家庭取向发展,主打操作容易,且可以应用到日常生活中的3D打印技术。

Chen Shihong said, 3 d printing technology in the near future there will be two kinds of development, the first is a precision technology direction development, specially used for the technology industry or research unit, belong to high-end application; On the other hand is to the personal or family orientation development, the main operating easily, and can be applied to 3 d printing technology in everyday life.

“3D打印技术可以加快创意成型的速度,也会间接的增加产品在国际上的竞争力。”实威国际公司工程师宋文贵说,以前必须将设计送到工厂7天后,才能看到成品,但现在只要一台3D打印机,最久在20小时内,精密的模型也可以被制作出来,大为降低公司所需的时间成本。

"3 d printing technology can accelerate creativity forming speed, can also indirectly increase the competitiveness of the products in the world." Real Song Wengui said wei international company engineer, design must be sent to the factory before 7 days later, to see the finished product, but as long as a 3 d printer, now the longest in 20 hours, the precision of the model can also be produced, greatly reduce the time needed for the company cost.

图说:未来3D技术的普及化,除了可以让设计师不需经过工厂就可看到自己设计的作品,甚至一些简单的生活用品也可能直接在家中制作。

Explanation: the future of 3 d technology diffusion, besides can let designers do not need to can see their design works in the factory, even some simple things may also directly produced in the home.


官方网站:http://www./

安徽合肥艺凌沙盘模型设计制作有限公司是专业 安徽模型、合肥模型、沙盘模型公司


 

版权所有(2009-2018) :安徽省艺凌模型设计有限公司 YLQIHUA@126.COM